Supply fan corn peeling machine corn peeling machine pictures corn peeling machine accessories McKinnon mechanical 


 One, installation and commissioning: corn peeling machine can be used two kinds of power: Motor and diesel. 
 A diesel engine type: two M12 x 70 bolt bracket before four, tractor beam, then the corn peeling machine on the bay on a long hole through the beam at the end of the adjustment rack position. the peeling machine pulley and engine pulley is connected correctly. (Before the operation should carefully read the instructions, according to the different diesel engine depending on the specific circumstances of operation). 
 2 Motor Type: (different peeling confidential use their specific requirements of the motor) when the use of the motor as the driving force, and four activity feet should be first on the peeler down, fixed, and then install the motor in the motor seat then use the V-belt pulley of the motor and pulley connected. When peeling machines to work properly, observe the peeling situation, if the stripping is not a net adjusted by adjusting the machine bolts on both sides of the peeling roll gap, and then re-test, when peeling function of the ear of corn the bract stripping net, batch jobs . Second, the Note 
 (1) before the operation carefully read their instructions, the required operation. 
 (2) the operator can not wear a wire gloves, not the handle close to the peeling roller. 
 Peeling machine work, the operator standing next to the clutch, always pay attention to the work of the peeling machine peeling machine is abnormal, should be immediately cut off the power and the engine off or cut off the power. 
 Operator stones, bricks are not allowed to be inserted in the hopper to avoid damaging the machine. 
 Operation of the machine and found that the sound is abnormal, should stop to check in a timely manner. 
 Repairs, or replacement parts, be sure to cut off all power, the engine off or cut off the power if necessary.