Supply fan corn peeling machine fan corn peeling machine type, rubber tire, the principle McKinnon mechanical 

 Corn peeling machine, belonging to corn processing machinery. Its main body, the body has a feed inlet, power seat connected to the body, the motor is installed in the power seat, the driving shaft installed in the bearing seat, the driving shaft connected through the belt and motor driving shaft has spiral strips and rubber nails, driving shaft through a gear and drive shaft to match more with raised rubber wheel on the drive shaft. Driving shaft at both ends of the bearing is not the same horizontal plane. Equipped with multiple rubber wheel driving shaft with spiral strips and rubber nails, drive shafts, drive shafts and drive shaft with each other evenly peeling device has entered inside the ear, assigned to the two pairs of relative rotation of the stripping axis, and the ear itself rotating smoothly forward, the move, a special peeling claw ripped the bract, and live in the instant axis of rotation Rolling bract to the drop-down, and the completion stripped the purpose. Ergonomics from 0.85 to 1.25 / h, stripping the net rate of 80% to 95% broken rate of less than 1% loss rate of less than 2%. Corn peeling operation can be completed to replace manual operations, improve work efficiency. 


 Structural principle, rack 

 2, the hopper 

 3, rubber peeling roller 

 4, the motor 

 5, V - belts 

 6, V-belt 

 7, corn bran exports 

 8: The exports of corn on the cob 

 It is mainly the rack into the hopper, drum, a discharge port composition. 

 Raw materials into the drum through the inlet chamber, by the drum body by rotation, friction, extrusion and push forward, off the corn bran, corn bran and corn on the cob is automatically discharged from their respective export.