Palace of gold, supply corn peeling machine corn peeling machine pictures corn peeling machine parts of agricultural machinery 

 Corn peeling machine, belonging to corn processing machinery. Its main body, the body has a feed inlet, power seat connected to the body, the motor is installed in the power seat, the driving shaft installed in the bearing seat, the driving shaft connected through the belt and motor driving shaft has spiral strips and rubber nails, driving shaft through a gear and drive shaft to match more with raised rubber wheel on the drive shaft. Driving shaft at both ends of the bearing is not the same horizontal plane. Equipped with multiple rubber wheel driving shaft with spiral strips and rubber nails, drive shafts, drive shafts and drive shaft with each other evenly peeling device has entered inside the ear, assigned to the two pairs of relative rotation of the stripping axis, and the ear itself rotating smoothly forward, the move, a special peeling claw ripped the bract, and live in the instant axis of rotation Rolling bract to the drop-down, and the completion stripped the purpose. Ergonomics from 0.85 to 1.25 / h, stripping the net rate of 80% to 95% broken rate of less than 1% loss rate of less than 2%. Corn peeling operation can be completed to replace manual operations, improve work efficiency. 


 Faults and troubleshooting 



 Failure phenomenon 
 Cause of the malfunction 
 Remedy 


 Peeling without a net 
 Too much of one, feed crops; 
 2, the roller speed is inadequate; 
 3, the crop is too wet; 
 Appropriate to reduce the feed rate of; 
 2, adjust the belt tension, adjust the roller speed; 
 Crops and dried before peeling; 


 Large motor load fever 
 Too much of one, feed crops; 
 2, the belt is too tight; 
 3, the voltage; 
 4, motor failure. 
 1, reduce the amount of feed; 
 2, with due emphasis on pine bark with; 
 3, full-time electrician check to exclude; 
 4, repair or replace the motor. 


 Slagging blockage 
 1, the speed is inadequate; 
 2, the crop is wet; 
 3, feeding excessive; 
 1, adjust the speed; 
 Dried before threshing should crop; 
 3, the feeding amount of uniform.